28Aug 2020 by mefexport

Simtek

Milling Tools, Threading Tools, Tool Brands, Turning Tools
SIMTEK Präzisionswerkzeuge GmbH was founded in 1994 and stands for high quality carbide precision tools with high performance ability.As a central part of the group, it dedicated to developing, producing and selling high performance carbide tools for metalworking. SIMTEK stands for high quality carbide precision tools with high performance ability. The standard range of tools includes 11.000 tools for grooving, turning, milling, broaching, thread whirling and polygon milling applications. The standard range starts with small part machining tools for applications in bores as of Ø 0,3 mm (0.012“) and goes up to multirow, highly complex disc milling cutters with a diameter of 200 mm (7.875“). Simtek tools are manufactured from micro grade carbide with advance coating technology give tremendous cost saving and consistency. Simtek provide solutions for various non standard…
Read More
06Jul 2020 by mefexport
Teknik Cutting Tools in Portugal

Teknik Cutting Tools in Portugal

Milling Tools, Tool Brands, Tool Holders, Turning Tools
History Teknik Cutting Tools has been established in 1987 in Turkey. Teknik Makina Tools started to produce cutting tools in 1994. Over 5.000 kinds of tools are produced in new factory building located in Fourth Industrial Area of Konya since 2015. There are 40 production lines which is capable to produce in several categories at the same time. Production and designing teams are all educated and certified according to ISO 9001:2015 quality standard to serve you better. Teknik Cutting Tools Products Face MillPrecising BoringShoulder MillerDisc MillingEnd MillingsT-Slot Milling CutterChamfering end MillingScrew HeadExternal Turning HoldersBoring BarsExternal Turning Holders With CoolantBoring Bars With CoolantCarbide Tool Holders With CoolantIndexable Insert-DrillsGrooving HoldersThreading HolderTool HoldersBlock for BladesSpare PartsBoring Bars Sets Teknik Catalog Download Here you can find Teknik Tools catalog ready for download: Teknik General 2020 You can lso dowload…
Read More
25Jun 2020 by mefexport

Korloy Tools

Milling Tools, Threading Tools, Tool Brands, Turning Tools
Korloy Tools has one of the greatest price/quality ratio. Korloy Inc. is a manufacturer of a full line of coated, uncoated, carbide and Cermet inserts. From its beginnings as a cooperative in 1966, Korloy has grown from a small factory in Seoul, South Korea, into an international corporation that sells its tools in more than 60 nations around the world. Today, the company is known for its efforts to become a global leader in cutting tools by pursuing continuous innovation. Manufacturing cutting-edge tools with advanced facilities and knowledgeable staff, Korloy has made continuous technological innovations to provide better machining tools for the following industries: automotive, machine, railway, shipbuilding, die and mold, electronic, medical and aerospace. KORLOY has provided advanced carbide cutting tools since its foundation in 1966. Now it is leading…
Read More
22May 2020 by mefexport
Ceramic Grooving Inserts

Ceramic Grooving Inserts

Turning Tools
Our ceramic grooving inserts provide optimized wear resistance and toughness when working with heat-resistant superalloys, such as Inconel, Nimonic and Waspaloy, or cast irons at high speeds.  Whether you are working with small components or grooving large diameters, you will find your inserts for grooving here. Ceramic Grooving Inserts Program Our grooving inserts program includes: FLAT GROOVE DOUBLE SIDEROUND GROOVE DOUBLE SIDEFLAT GROOVE SINGLE SIDEROUND GROOVE SINGLE SIDE Grades available for grooving: mixed (black) ceramics, white ceramics, Silicon Nitride (Si₃N₄). Tool holders for ceramic grooving inserts CGFSCGFS 3225C40R/LCGFS 3225C50R/LCGFS 3225C60R/LCGFS 3225C70R/LCGFS 3225C80R/LCGFS 3225C100R/LCGRDCGRD 3225C40R/LCGRD 3225C50R/LCGRD 3225C60R/LCGRD 3225C70R/LCGRD 3225C80R/LCGRD 3225C100R/LCGRD 4040C40NCGRD 5040C40NCGRSCGRS 3225C40R/LCGRS 3225C50R/LCGRS 3225C60R/LCGRS 3225C70R/LCGRS 3225C80R/LCGRS 3225C100R/LCGFDCGFD 3225C40R/LCGFD 3225C50R/LCGFD 3225C60R/LCGFD 3225C70R/LCGFD 3225C80R/LCGFD 3225C100R/L Related materials Ceracarb toolsDownload Ceracarb CatalogCeramic cutting toolsCeramic Inserts For Hard TurningCeramic Threading Inserts Inquiry and quick order…
Read More
22May 2020 by mefexport
Ceramic Threading Inserts

Ceramic Threading Inserts

Threading Tools, Turning Tools
Ceramic threading inserts in Ceracarb tools program available in two different grades - CC200 (white ceramics) and CC520 (cermet). These threading inserts are ceramic inserts for hard turning. Our comprehensive selection of thread turning solutions for internal and external applications make it possible to produce high-quality threads in all sizes and profiles. On this page you can find information about high-performance threading of hardened steels and cast iron as well as super alloys (Inconel and Nickel base alloys). INGN Ceramic Threading Inserts There are two sizes available in catalog (but you can always ask for different shapes and sizes): Threading insert INGN 160435 CC200Threading insert INGN 160435 CC520Threading insert INGN 220435 CC200Threading insert INGN 160435 F303Threading insert INGN 160435 F304 Thread profile according to specification (metric threads, pipe-threads, diffrerent inch-threads…
Read More
20May 2020 by mefexport
Ceramic cutting tools

Ceramic cutting tools

Milling Tools, Round Cutting Tools, Turning Tools
In general, ceramic cutting tools have found applications principally in hard turning and milling cast irons and superalloys and in finishing hardened materials. For cutting tools, two kinds of ceramic composite materials are used, which can be differentiated according to the matrix materials. There are ceramics based on aluminium oxide (Al2O3) and silicon nitride (Si3N4). The key to successful application of ceramic cutting tools is to remember that they can take far more heat than do carbides, because they soften in the range of 2200°C versus about 870°C for carbide tools. Aluminium oxide-based ceramics are divided into pure, mixed and reinforced ceramics. A range of ceramic cutting tool materials aluminium oxide (white) ceramicsmixed (black) ceramicssilicon nitride-based ceramics White Ceramics Alumina-zirconia (white ceramics) contains up to 10% ZrO2 in order to…
Read More
20May 2020 by mefexport
Ceramic Inserts For Hard Turning

Ceramic Inserts For Hard Turning

Turning Tools
Ceramic inserts for hard turning (also known as ceramic lathe inserts) - cutting tools made of ceramic composite materials. Turning is an almost ideal operation for ceramics. In general, it is a continuous machining process that allows a single insert to be engaged in the cut for relatively long periods of time. This is an excellent vehicle to generate the high temperatures that make ceramic inserts perform optimally. Ceramic cutting tools have the potential for high-speed finish machining as well as for high-removal-rate machining of difficult-to-machine materials. The development of ceramic tool materials can be broadly categorized into three types: monolithic forms, thin coatings, and whisker-reinforced composites. Hard Turning Ceramic Program Here is the list of ceramic turning inserts geometries (SiAlON, Silicon-Nitride, black mixed ceramics, whisker, white ceramics, CBN and…
Read More
06May 2020 by mefexport
Ceracarb Tools

Ceracarb Tools

Milling Tools, Tool Brands, Turning Tools
Ceracarb Tools, brand from South Corea, is manufacturer of advanced ceramic cutting inserts, inserts with PCD tips, CBN inserts, whisker ceramic, SiAlON, silicon nitride cutting tools. Ceracarb Company Profile CBN and PCD inserts Ceramic cutting inserts (white ceramic, black ceramic, coated ceramic inserts, reinforced with whiskers) SiAlON and Silicon Nitride insertsBest choice for cast iron (ISO K) and super alloys (ISO S) Production Program The Cubic Boron Nitride (CBN, also known as Amborite) inserts are, thanks to the high technology, one of the best-seller of Ceracarb. At the beginning they were used for finishing of irons and hard materials.The technology development has widened the applications to heavy dry roughing of grey cast-irons,it is possible to use them also with an abundant coolant flow.  Besides the single tip series, with the time…
Read More
05May 2020 by mefexport
AKKO Tools

AKKO Tools

Milling Tools, Tool Brands, Tool Holders, Turning Tools
History AKKO Oto. Mak. Hırd. San. Tic. Ltd. Şti, which has been  founded by Abdullah KARAKUŞ in 1986, produces Turning Tool Holders, Threading and Grooving Tool Holders, U-Drills, Milling Tool Holders and Precision Tool Holders ( OEM Tool Holders ). Now, AKKO produce standard 3000 kinds of tool holders with production capacity of 180.000 pieces per annum in an area about 8000 square meter  with latest technology lathes and equipments that are produced by countries like Turkey, Japan, Germany, Sweden. AKKO keep ready about 100.000 pieces produced products in our stock to meet request of our customers immediately without saying them we have nothing for sale. All kind of process from machining of steel to heat treatment and coating on tools are made in integrated factory AKKO. Nowadays, AKKO are…
Read More